Diago can be chosen with the following control buttons:
Alu control button
Remote control
Cable hand control
DIAGO Technical Info
110 V
.7" / sec.
17"
330 lbs.
Planning:
The lift can be adjusted to cabinet heights between 28" - 43".
Depth of safety trip panel is 13.8". The lift works best for cabinets with a depth of 11" - 13.4".
The lift extends 4.3" from the wall. (Adjacent cabinets should also be brought out from the wall by 4.3" for alignment at the front edge or the lift unit may be recessed into the wall.)
Several cabinets can be mounted on the lift. (Max. 71")
There must be 0.2" clearance between the adjacent cabinet and the cabinet to be lifted to allow space for movement.
Check the condition of the wall (material, positioning of bolts). Plaster walls must be strengthened.
Will the cabinet have worktop lighting? (under the cabinet)
Which control unit is required? An area of 3.5" x 3.5" is required for a recessed control button
Installation:
The lift is screwed to the wall.
The control unit is plugged into the wall socket
The cabinet is mounted on the frame and adjusted so that it is horizontally and vertically aligned.
The safety trip panels are mounted under the cabinet.
The control button is mounted in a convenient position.
Any lighting is mounted under the safety trip panel.
Light ramp can be mounted on safety trip panel.
DIAGO Wallcabinet Lift Accessories
Screening Valence for DIAGO 504
Fitted between the lift and the cabinet to conceal the lift when lowered.
Description:
Width 23.75" / 60 cm
(suitable for cabinet width 23.75" - 43.3" / 60 cm - 110 cm)
Width 47.25" / 120 cm
(suitable for cabinet width 47.25" - 71" / 120 cm - 180 cm)
Bathrooms
Download Adjustable Cabinets Installation Instructions
