An installation area for a screen, for example, is lowered into the rear of the wall cabinet. When raised up, the screen is concealed behind a panel. There is still room for the storage of glasses etc. in front of this panel.
Control:
The screen is lowered from the cabinet simply by pushing a button. It is operated using remote control. |
Monitor Lift Models
Suitable for cabinet heights from 27.5" (70 cm). Cabinets taller than 27.5" (70 cm) are completed with a fixed shelf. |
FLAT 960
With sides, bottom and front cover plate

|
FLAT 961

|
Lift width 22.36" (56.8 cm)
Cabinet Width 23.75" (60 cm)
Depth 5.3" (13.5 cm)
|
Lift width 22.36" (56.8 cm)
Cabinet Width 23.75" (60 cm)
Depth 2" (5 cm)
|
|
Monitor Lift Control Types |
Monitor Lift can be chosen with the following control buttons: |

Alu control button
|

Remote control
|
|
|
|
Monitor Lift Technical Info |
Planning:
When planning, note the following points:
-
Check the condition of the wall (material, positioning of cross bars). Plaster walls must be strengthened.
-
Cabinet’s internal width.
-
Cabinet’s internal height.
-
Which control unit is required?
An area of 3.5" x 3.5" (9cm x 9cm) is required for a recessed button.
Installation:
-
The back edge of the cabinet base is cut away. If the back of the cabinet does not lie close to the wall, it should be removed.
-
The depth of the shelves in the cabinet is cut away.
-
The lift unit is screwed to the wall.
-
The transformer is connected to the wall socket.
-
The up/down button is installed in a convenient position.
|
|
|
| |
|
| |